Extron Electronics HAE 100 User Guide - Manual (Page 19)

Firmware Updates
This section provides information on:
z z
Downloading the HAE 100 Firmware
z z Updating the Firmware
Downloading the HAE 100 Firmware
Use the following procedure to download the latest HAE 100 firmware.
1. Go to www.extron.com/download .
2. On the Download Center screen, click the Firmware link on the left sidebar menu.
3. Find the HAE 100 firmware download from the alphabetical list.
TIP: Clicking on the H in the alphabetical menu bar brings up all of the firmware
downloads that start with "H" and should assist with finding the HAE 100
firmware download link.
4. Click the Download link for the HAE 100 firmware and follow the instructions that
appear on the screen.
5. The file is saved onto the computer. Note the folder where the firmware file is saved.
Updating the Firmware
Extron periodically updates product firmware. When updating any Extron product to the
latest firmware, be sure to read the supplied release notes, or contact an Extron Application
Engineer to determine if an Extron product requires a firmware update.
The following sections detail how to download and install firmware for the HAE 100.
Downloading and Installing the Firmware Loader Software
Extron recommends using the latest version of the Firmware Loader software to update the
firmware on the HAE 100. If necessary, use the following procedure to download and install
the Firmware Loader software.
1. Go to www.extron.com/download .
2. On the Download Center screen, click the Software link on the left sidebar menu.
3. On the next Download Center screen, locate and click the Download link for the
Firmware Loader software (see figure 6).
Figure 6. Firmware Loader Download Link
HAE 100 HDMI Audio Extractor • Firmware Updates 14