Extron Electronics HAE 100 User Guide - Manual (Page 7)

The HAE 100 incorporates EDID Minder ® to define specific audio formats and video
resolutions for the input. It also has the ability to store EDID obtained from the display device
to non-volatile memory. In addition, the HAE 100 has a front panel configuration port which
is used to configure and update the product in the field in the event that new firmware is
required.
The product is HDCP compliant and supports HDMI 1.3 standards. The HAE 100 is housed in
a 1U high, ¼ rack width, 3 inch deep metal enclosure.
Features
S/PDIF output — Allows for digital audio output over a single RCA connector.
Analog output — Allows for two channel stereo analog audio output over a 5-pole,
3.5 mm captive screw connector.
S/PDIF & Analog audio toggle switch — Selects the output format of the audio which is
taken from the HDMI input signal.
Embedded digital audio output — The HDMI output re-embeds the audio taken from the
HDMI input.
HDMI 1.3 compatible — Supports HDMI 1.3 specification features, including data rates up
to 6.75 Gbps and Deep Color.
EDID Minder — A proprietary EDID management process from Extron. EDID Minder
automatically manages the EDID between a digital display device and one or more input
sources. By maintaining continuous EDID communication with all sources, EDID Minder
ensures that digital sources power up properly and maintain their video output, whether or
not they are actively connected to the digital display device.
Selectable HDMI audio pass-through — The user can control whether the HDMI output
passes audio by setting a DIP switch on the rear panel.
Automatic input cable equalization — Automatically compensates for weak source
signals or signal loss when using long input cable assemblies.
Input and Output LEDs — Eight green LEDs provide the status of the various functions of
the product.
Front panel USB configuration port — One female mini USB type B is used to update the
firmware of the product and check the status of the various functions of the product.
Versatile mounting options — The unit is 1U high, 3 inches deep, and ¼ rack wide,
allowing it to be conveniently mounted in a rack, mounted under a desk, or set on a
tabletop.
HDCP compliant — Prevents the reproduction of copyright protected content.
External universal ENERGY STAR
® qualified power supply included, replacement
part number 70-775-01 — Provides worldwide compatibility, low power consumption, and
reduced operating costs.
HAE 100 HDMI Audio Extractor • Introduction 2