Extron Electronics HAE 100 User Guide - Manual (Page 9)

Front Panel Features
The front panel of the HAE 100 is shown in figure 2 below.
SIGNAL
INPUT
CONFIG
HDCP
2-CH PCM
BITSTREAM
SIGNAL
OUTPUT
HDCP
ANALOG
S/PDIF
HAE 100
HDMI AUDIO EXTRACTOR
1 2 3 4
Figure 2. HAE 100 Front Panel
a
Power LED — The LED indicator lights when the unit is receiving power.
b
Config port — One female type B mini USB is used to update the firmware of the
product, configure various functions of the unit, and view the current status of the unit.
c
Input LEDs — Four LEDs are used to provide the status of the HDMI input.
z z
Signal — This LED lights when the unit is receiving a signal on the HDMI input.
z z
HDCP — This LED lights when the input signal is HDCP encrypted.
z z
2-CH PCM — This LED lights when the incoming embedded audio signal is a
2-channel Digital LPCM audio format.
z z
Bitstream — This LED lights when the incoming embedded audio signal is a
Dolby Digital or DTS audio format.
d
Output LEDs — Four LEDs are used to provide the status of the various functions of the
HDMI and audio outputs.
z z
Signal — This LED lights when the unit is providing video on the HDMI output
connector.
z z
HDCP — This LED lights when the HDMI output signal is encrypted with HDCP.
z z
Analog — This LED lights when the unit is providing audio on the analog output.
z z
S/PDIF — This LED lights when the unit is providing audio on the S/PDIF output.
HAE 100 HDMI Audio Extractor • Panels and Cabling 4