Extron Electronics Global Configurator 2.2 - Manual (Page 16)

 Global Configurator, Windows-based Control Programs
PRELIMINAR
Y
Step : Verify the update.
1. On the Web page, click the Status tab and confirm that the version is 2.00.
N It may take time for the firmware to load and initialize, so the Web page may not
return right away. This does not indicate a problem; wait 30-45 seconds and
click the Status tab again.
2. Close the browser, or repeat steps 1 through 4 to update additional System 5
IP switchers.
PRELIMINAR
Y