Extron Electronics MGP 462D - Manual (Page 33)

3-11 MGP 462 • Operation
Output Type submenu
Rotate either the horizontal Adjust ( ) or the vertical Adjust ( ) knob to select the
output signal type required by the display device. Available signal types are
RGBHV, RGsB, YUV bi-level and YUV tri-level. The default is RGBHV.
Combined H and V Sync (S) is available on the “S” BNC connector when the
unit is set to RGBHV.
Sync Polarity submenu
The display device may require a particular combination of horizontal (H) and
vertical (V) sync signal polarities. Rotate either the horizontal Adjust (
) or the
vertical Adjust ( ) knob to select the sync polarity. The options are H-V-, H+V-,
H-V+, H+V+, or na (appears when YUV Bi-lvl or YUV TriLvl is selected). The
default is H-V-.
This submenu appears only when sync polarity is applicable based on the other
selected output settings.
Window Configuration menu
The Window Configuration menu allows you to set window front/back priority,
add colored borders to the windows, select which window transition effect to use
when muting (closing) a window, and specify the duration of the selected effect.
Window Configuration menu flow
The menus time out and return to the default cycle after 20 seconds of
inactivity. However, any selections you made with the Adjust knobs are saved
and remain in effect.
Window Priority submenu
The Window Priority submenu allows you to set how the windows will overlap
one another. The submenu lists the two windows in order of their priority, from
left to right. Rotate the vertical Adjust ( ) knob to switch the priority between
windows 1 and 2. (You do not use the horizontal Adjust knob with this submenu
on the MGP 462.)
Output
Configuration
Window
Configuration
MENU
Window Priority
F 2 <1> B
NEXT
Window 1 Border
None
NEXT
Window Effect
Cut
NEXT
NEXT
Rotate either Adjust knob
to adjust the submenus.
Effect duration (in seconds)
• 0.0 to 5.0 seconds
in 0.1 second increments
(default is 0.5)
Window priority
• 1 2 (default)
• 2 1
Window 1 border color
• None (default) • Magenta
• Red
• Cyan
• Green • Yellow
• Blue • Black
• White
Window effect
• Cut (Default) • Soft Wipe Curtain Out
• Dissolve • Hard Wipe Up
• Soft Wipe Up • Hard Wipe Down
• Soft Wipe Down • Hard Wipe Right
• Soft Wipe Right • Hard Wipe Left
• Soft Wipe Left • Hard Wipe Center In
• Soft Wipe Center In • Hard Wipe Center Out
• Soft Wipe Center Out • Hard Wipe Square In
• Soft Wipe Square In • Hard Wipe Square Out
• Soft Wipe Square Out • Hard Wipe Curtain In
• Soft Wipe Curtain In • Hard Wipe Curtain Out
NEXT
Effect Duration
0.5 second(s)
NEXT
Window 2 Border
None
Window 2 border color
• None (default) • Magenta
• Red
• Cyan
• Green • Yellow
• Blue • Black
• White