Extron Electronics MGP 462D - Manual (Page 44)

Operation, cont’d
MGP 462 • Operation 3-22
4 . Press the Enter button to save the current window setting in the preset
location number you selected. The LCD screen shows a message indicating
that the preset is being saved to the selected memory location, followed by a
message that the preset has been saved.
The following examples show a preset saved to location 1.
WINDOW PRESET
Saving to #01
WINDOW
#01 SAVED
PRESET
If you want to exit this menu without saving any changes, repeatedly press
the Preset Recall/Save button until the following message appears on the
LCD screen, then press the Enter button to exit the Window Presets dialog.
WINDOW PRESET
[ENTER] TO EXIT
Recalling a window preset
To recall a window preset using the front panel buttons:
1 . Press and release the Preset Recall/Save button. The following message
appears on the LCD screen:
WINDOW PRESET
Recall #01 woINP
2 . If you do not want to recall the input whose number was displayed when the
preset was saved, proceed to step 3.
If you want to recall the input with the preset, press the Preset Recall/Save
button again. The following message appears:
WINDOW PRESET
Recall #01 wINP
If you select this option, the inputs change to display the sources that were
displayed at the time the preset was saved, along with all input settings
specified by input presets. (See Input presets, on the next page.)
3 . Use either Adjust knob to select a window preset number to recall.