Extron Electronics MGP 462D - Manual (Page 34)

Operation, cont’d
MGP 462 • Operation 3-12
Window 1 Border and Window 2 Border submenus
Use these submenus to select border colors for the two windows. Available options
are Red, Green, Blue, White, Magenta, Cyan, Yellow, and Black. You can also select
None (no border), which is the default setting.
Window Effect submenu
Use this submenu to select a transition effect for the MGP 462 to use when muting
and unmuting windows. To select a transition effect, follow these steps:
1 . Press the Menu button repeatedly until Window Configuration is displayed
on the LCD screen.
2 . Press the Next button repeatedly until Window Effect is displayed.
3 . Rotate either the horizontal Adjust ( ) or the vertical Adjust knob ( ) to
select a transition effect.
Available effects
Cut — A cut instantly mutes or unmutes the window. The effect duration does not
apply.
Dissolve — A dissolve causes the window to fade out.
Dissolve Dissolve
Standard wipe (soft wipe or hard wipe) — A standard wipe causes the new
window to appear to unroll over the other one. The new window can roll
from the top, bottom, left, or right side of the window. A soft wipe has a
fuzzy leading edge; a hard wipe has a sharp edge.
Center wipe — A center wipe causes the new window to appear to unroll over the
other one in one of two ways:
• In from the top and bottom edges to the center of the window
• Out from the center to the top and bottom edges of the window
A center wipe can have a soft (fuzzy) leading edge or a hard (sharp) one.