Andrew James AJ000573 Premium Bread Maker with Integrated Scales User Manual
Page 10
10
8.
DOUGH-
This program will knead and raise the dough only. Remove the dough
and use for making bread rolls, pizza, steamed bread, etc.
9.
ULTRA FAST- The quickest programme to knead, rise and bake bread, the bread
produced will be smaller and more dense than other loafs. Please note bread
produced on this setting requires warm water instead of cold water.
10.
BAKE- The bake setting is for baking only, which can be used to increase the
baking time on selected settings this feature is very helpful to set jams and
marmalades. This programme is normally used together with the “DOUGH”
function and will allow additional ingredients to be added (kneaded) into the
bread before the loaf is cooked. Remove the kneading paddle from the baking
pan, reshape the dough and return it to the machine. Allow the dough to rise for
at least 40 minutes and place it back in the machine. Select the “BAKE”
programme to then cook the bread. The “BAKE” programme can also be used to
add more colour to loafs. Simply press the “BAKE” programme and bake the loaf
until the required colour is achieved.
11.
GLUTEN FREE- The ingredients to create gluten-free breads are unique. While
they are “yeast breads,” the dough is generally wetter and more like a batter. It
is also important not to over-mix or over-knead gluten-free dough. There is only
one rise and due to the high moisture content, baking time is increased. Mix-ins
must be added at the very beginning of the cycle with the other basic
ingredients.
12.
HOMEMADE-Designed so it can be programed by the operator. The time range
of each program can be set as follows:
Under the menu of HOMEMADE
1.
Press CYCLE button once, KNEAD1 will appear on the LCD. Then press the TIME
button to adjust the minutes, and press the CYCLE to confirm the time for this
step;
2.
Press CYCLE to enter the next step, RISE1 will appear on the LCD. Then press the
TIME button to adjust the minutes, the number will increase rapidly if the
TIME button is held down. Press CYCLE to confirm.
3.
Follow the above steps to set the remaining functions. Once the last function has
been set, press the START/STOP button to exit the setting.
KNEAD1: 6-14 minutes
RISE3: 0-120 minutes
RISE1: 20-60 minutes
BAKE: 0-80 minutes
KNEAD2: 5-20 minutes
KEEP WARM: 0-60 minutes
RISE2: 5-120 minutes