Andrew James AJ000573 Premium Bread Maker with Integrated Scales User Manual
Page 16
16
Using the bread maker for the first time
During initial use the bread maker may emit a little smoke and smell, this is due to the
burning off of substances left on during the manufacturing process and is completely
normal but can affect the taste of your bread, therefore please follow these steps
before using the machine:
1.
Wash the bread pan and kneading paddle in hot soapy water and dry them
thoroughly.
2.
Position the bread maker on a flat, dry and heat resistant surface.
3.
Place the bread pan into the bread machine and turn it clockwise until it has fully
clicked into place.
4.
Fix the kneading paddle onto the drive shaft.
5.
Close the lid of the appliance.
6.
Plug the appliance in and switch it on at the mains.
7.
The bread maker will beep to signal that the appliance has turned on and the
LCD display will automatically display “1000g, 1, MEDIUM, 3:00”
8.
Press the MENU button repeatedly and select the programme BAKE. If you miss
the programme keep pressing the MENU button until you reach the bake
programme again.
9.
Select the programme and press the STOP/START button and leave the bread
maker to bake for ten minutes.
10.
Press the STOP/START button after ten minutes to stop the program.
11.
Open the bread maker and allow the bread maker to fully cool.
12.
To remove the bread pan rotate it in an anti-clockwise direction.
13.
Wash, rinse and dry the bread pan and return it to its original place.