Andrew James AJ000573 Premium Bread Maker with Integrated Scales - Manual (Page 12)

12
Other programmes
KEEP WARM
Bread can be automatically kept warm for 1 hour after baking. During the keep warm
function, if you would like to take the bread out, switch the program off by pressing the
START/STOP button. After baking, the LCD displays “0:00” and beeps will signal the
start of the cooling process. It will then revert back to the default setting of the
machine.
NOTE: The programs Dough and Jam do not have the function of keep warm.
MEMORY
If the power supply has been interrupted during the course of making bread, the
process of making bread will be continued automatically within 10 minutes, without
the need to press the START/STOP button. If the interruption time exceeds 10 minutes,
the memory cannot be kept, and the bread maker must be restarted from the
beginning. If the dough has not entered the rising phase when the power supply breaks
off, you can press the START/STOP directly to continue the program from the
beginning.
ENVIRONMENT
The machine may work well in a wide range of temperatures, but there may be a
difference in loaf size between a very warm room and a very cold room. We suggest
that the room temperature should be within the range of 15˚c to 34˚c.
WARNING DISPLAY
If the display shows “HHH” after you have pressed the START/STOP button, 5 beeps
sound, which signals that the temperature inside the bread maker is still too high and
the program will not function. Open the lid and let the machine cool down for 10 to 20
minutes.
If the display shows “LLL” after you have pressed the START/STOP button, 5 beeps will
sound, which signals that the temperature inside of the bread pan is too low. The bread
maker should be placed in a room with a higher temperature. (Except the program of
Bake).
If the display shows “EE0” after you have pressed the START/STOP button, beeps will
follow, this signals the open circuit is corrupted or the temperature of the bread maker
is incorrect. Press the START/STOP button to stop the beeping sound. The “EE0” in the
LCD will continue flashing, please call the technical department. If the display shows
“EE1”, it means the temperature sensor has short circuited