Andrew James AJ000573 Premium Bread Maker with Integrated Scales - Manual (Page 8)

8
Programmes
START/STOP BUTTON

This section will give instructions on how to pause, start and stop the selected
program.

To start a program, press the stop/start button once. A short beep and the two
dots will flash, signalling the program is beginning to start.

All other buttons are inactive during a program cycle, apart from the stop/start
button.
To stop the program press and hold the stop start button for approximately three
seconds, a long beep will then signal the program has initiated the close down
procedure.
PAUSE
After a procedure starts up, you can press the PAUSE button to pause it at any time. The
operation will be paused but the setting will be memorized and the outstanding time will
flash on the LCD screen. Press the PAUSE button again and the program will continue. If
left for 10 minutes without pressing any button the program will continue.
LIGHT
To view your loaf during the baking process simply press the LIGHT button once and the
inside of the appliance will become illuminated. The light will stay on for 1 minute and
then go off automatically. If you wish to turn the light off before the minute has elapsed
press the LIGHT button and it will turn off .