Preliminary – Alpha Technologies ACS HP Series User Manual
Page 15
Preliminary
15
AIP900-0012-B0-001 Rev. A (01/2012)
2.3 Electrical Connection and Wiring
Always refer to the ACS system electrical schematic diagram for proper installation.
Before connecting the ACS Series Battery Charger insure that:
The battery is disconnected (if applicable)
The circuit breakers are “OFF”
The relays, fuses and circuit boards are installed
The unit is wired in accordance with the instructions (refer to the wiring connections and
electrical diagram)
Wire size is very important. The nameplate provides the essential information regarding the input and
output voltages and currents. Refer to your Local or National Electrical Code for WIRE GAUGE and
GROUNDING instructions.
CAUTION!
WARNING!
Wire ampere capacity must be sized to the maximal correspondent current. Correct voltage and
polarity are of critical importance. Check all connections for tightness and polarity. Connect battery (if
applicable) to the output terminals observing its polarity.
2.0 Installation