Preliminary – Alpha Technologies ACS HP Series User Manual
Page 19
Preliminary
19
AIP900-0012-B0-001 Rev. A (01/2012)
3.3.1 Startup and Reset Procedure
When the CXC is powered-up or reset, it will first perform a 15-second self-test before displaying
the Cordex logo and various identification messages. The three front-panel LED’s will illuminate
temporarily, but will extinguish after the system has finished its self-test. Next, the GUI will display
the power system’s parameters during Normal operating mode.
3.3 CXC Controller Operational Status
The Charging system is shipped with the Cordex CXC Controller pre-installed. Detailed information
regarding installation, operation and fault diagnosis can be found in the Cordex Controller technical
manual (018-570-B2).
Fig. 3-2, Cordex Controller Front panel
3.0 Operation