Brickcom CB-500A - Manual (Page 26)

- 19 -
EasyConfig
To launch EasyConfig, select EasyConfig from the start menu. If Complete Setup type was
used in the software installation, an EasyConfig icon was installed on the desktop. Double
click to open the icon.
If Custom Setup type was used in the software installation and an EasyConfig icon was not
installed on the desktop, the program will be installed under C:\Program
Files\Brickcom\EasyConfig unless the program was saved to a preferred directory.
1. Click <Start> to continue. The program will automatically search for the camera
in the intranet.
NOTE - Check “Skip the hardware installation guide” to skip checking the hardware
connection. To check the hardware installation settings, do not check the option box.