Brickcom CB-500A - Manual (Page 56)

- 49 -
PTZ Control Panel:
Click the PTZ Setting button (marked by 1 on the picture) on the
control panel to show the PTZ control section (marked by 2 on
the picture). The PTZ control section consists of 8 directions and
the Home button at the center.
1. Click the direction buttons to change the viewing direction
on the image.
2. Click the Home button at the center of the PTZ control
section to revert to the default viewing direction and zoom level.
After clicking the Setting button, the Zoom in and Zoom out buttons
will show up.