Brickcom CB-500A - Manual (Page 78)

- 71 -
Motion Detection
Motion can be detected by measuring changes in the speed or vector of an object or objects in
the monitored area. This section explains how to configure the Network Camera to enable
motion detection.
Detection Setting – Use this setting to enable and define the motion detection windows. The
user can defined up to three areas on the live view window for motion detection.
1. Select <Window1>, <Window2>, or <Window3> to adjust the motion detection window.
2. Check the box to enable the window.
3. Use the mouse to resize or move the motion detection window.
4. Adjust the “Sensitivity” level. Lower sensitivity levels will result in more activity needed
to trigger an event.
5. Adjust the “Threshold” to change the threshold level. The higher the threshold, the
larger objects need to be to trigger an event.
6. The chart below the Live View window indicates the activity level of the Motion
Detection window. When motion is detected by the camera and exceeds the defined
threshold, a red bar will appear. Users can use this feature as a trigger source to send
photos or videos to a remote server via email or FTP.
Click Apply to apply settings or Cancel to cancel changes.