I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera - Manual (Page 21)

21
Chapter 2. Camera Installation
2-1.
Wall Mount installation
Fix the camera
This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the
external cable is not. You are recommended to install this product below the edge of eaves to prevent
the cable from being externally exposed.
1)
Paste the mount hole sticker on the position that you want to install.
2)
Use the mount hole sticker to make a hole of 30mm in diameter for passing cable, and drill
another three holes on the wall to fix bracket mount.
3)
Insert the anchors.
4)
Fix the screws.