I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera - Manual (Page 22)

22
Adjust camera angle from bracket mount (Please refer the photo as below)
1)
Use the Hexagon wrench to loosen the bolt and to rotate the bracket to suitable position.
2)
Adjust horizontal, vertical or rotate camera body angle of the camera.
3)
Use the Hexagon wrench to tighten a bolt after adjusting the camera.
Adjust the Lens’s zoom and focus (Please refer the photo as below)
1)
Remove the sunshield from the camera.
2)
Remove the front cover from the camera by turning it counterclockwise.
3)
Unlock the Zoom or Focus lever before adjusting the lens
4)
Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & TELE) and
clockwise for (WIDE & FAR) position.
5)
Tighten the zoom or focus levers, taking care not to adjust the zoom/focus position.
6)
Close and tighten the front cover.
7)
Replace the sunshield.