I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera - Manual (Page 50)

50
For example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5
seconds, the IP Camera starts to record at 9:59:55.
Post-record: The time you set to stop recording after the scheduled time or the event. For
example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5
seconds, the IP Camera records until 11:00:05.
Overwrite: If you enable his function and the HDD is full, the new record files overwrite the
oldest record files automatically.
Keep days: If you enable his function and the HDD is full, the new record files will be stop
save into the HDD when the storage days over your setup volume of Keep days.
Make sure the size of storage media allow to save video clips which setup volume of “Keep
days” mode.
Record path: Select the recording media via FTP server or SD card.
To configure record settings, please make sure that you have the network storage device within the
network or the SD card inserted in your IP camera.