I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera - Manual (Page 37)

37
click Save to change the setting.
QoS: Click this button to adjust the QoS (Quality of Service) volume and it can help solve the
network delay and network congestion by configuring the priority of data sending the audio and
video and control command. The valid DSCP value ranges from 0 to 63. The DSCP value is
bigger, the priority is higher. Click Save to change the setting.
Make sure that you enable the QoS function of your network device (such as a router) and it
will ask for a reboot for the settings to take effect.
Timing: Click this button to setup the time of IP camera. The detail process description as below:
Time Zone setup: Configuring Time Synchronization Manually. When the IP Camera is taken to
another time zone, you can use the Time Zone function to adjust the time. The time will be adjusted
according to the original time and the time difference between the two time zones.
From the Time Zone drop-down menu to select the Time Zone in which the speed dome locates.
Use DST: If there is the habit of adjusting clocks forward in your country in certain time period of
a year, you can turn this function on. The time will be adjusted automatically when the Daylight
Saving Time (DST; Summer time) comes. Configuring DST process as below steps:
(1) Check to enable the DST function