MoTeC PWC Plug-In ECU - Manual (Page 30)

MoTeC Sea-Doo 2010 Installation
Configuration File
The Sea-Doo 2010 PWC Plug-in ECU is compatible with all RX
from 2010. These models differ from 2004-2009 models in that they use a
different stock ECU which includes Electronic Throttle Control (Drive
and also offer Brake and Suspension options on varying models. Both the
ECU and the harness connector are different and the 2010 Adaptor Looms
are not interchangeable with the 2004-2009 Adaptor Looms.
• 2010 Configuration files match original ECU part numbers:
420664942, 420664947.
To mimic all original Sea-Doo functions including dashboard alerts, the Sea
Doo PWC Plug-In ECU requires M400 firmware version 3.52P or higher.
23
in ECU is compatible with all RXTX models
2009 models in that they use a
different stock ECU which includes Electronic Throttle Control (Drive-by-Wire)
and also offer Brake and Suspension options on varying models. Both the
and the 2010 Adaptor Looms
2009 Adaptor Looms.
Configuration files match original ECU part numbers:
Doo functions including dashboard alerts, the Sea-
In ECU requires M400 firmware version 3.52P or higher.