Controls, Introduction, 1 safety precautions – Carolina Electronic Balances User Manual
Page 4
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions. Please read
the manual completely before using the scale.
1.1 Safety Precautions
Please follow these safety precautions:
•
Verify that the Power Adapter input voltage matches the local power supply
voltage.
•
Use the scale only in dry locations.
•
Do not operate the scale in hostile environments.
•
Do not drop loads on the pan.
•
Do not place the scale upside down on the pan.
•
Service should be performed only by authorized personnel.
1.2. Controls
TABLE 1-1. CONTROL FUNCTIONS.
Key Name
Function
• Primary function (Short Press) – If scale is Off, turn
On. If scale is on, perform Zero/Tare function
• Secondary function (Long Press) – Turn scale Off
On-Zero
Off
Yes*
• Menu function – (Yes) This key is used to accept
the currently displayed setting
• Primary function (Short Press) – Send the current
display value to serial port if installed
Cal*
• Secondary function (Long Press) – Starts Span
calibration as available in Menu
• Primary function (Short Press)– Advances to next
available unit
Unit
No*
• Menu function – (No) This key is used to reject the
displayed setting and advance to next available
setting
*The actual text may vary on some models though the functionality is the same.