J&M GC-24T Assembly User Manual
Page 36
Advertising
GC24
t
-1 G
rain
C
art
a
ssembly
-36-
STEP - 69
STEP - 68
Install driveline shield. Use
(3) M10 x 25MM serrated hex
head bolts and (3) M10 serrated
hex flange nuts to attach the
driveline shield to the frame.
Attach the manual holder with
(2) M6 hex head bolts, (2) M6
washers and (2) M6 hex head
nuts.
Install the driveshaft assembly with M16 x 45 MM bolts and locknuts without flanges. Only use wash-
ers on bolt and nut for end plates that bolt onto the main frame weldment.
Advertising