American Panel HURRICHILL AP20BC175-2 - Manual (Page 17)

AP20BC175-2 Manual
16
p. To change to YES or NO, press or then
press .
NO Blinks
q. To change to YES or NO, press or then
press .
NO Blinks
r. To change to YES or NO, press or then
press .
YES Blinks
s. To change to YES or NO, press or then
press .
NO Blinks
For YES, the display will show:
The P.C. baud rate should be left at 38400.
However, to make a change:
t. To change the baud rate, press or then
press .
38400 Blinks
u. To change the number (between 01 & 32), press
or then press . 01 Blinks
v. To change to YES or NO, press or then
press .
YES Blinks
For YES, the display will show:
The printer baud rate should be left at 1200.
However, to make a change:
w. To change the baud rate, press or then
press .
1200 Blinks
x. To change the timing, press or then
press .
15 Blinks
INITIAL PROGRAMMING
SHOCK FREEZE?
NO
INITIAL PROGRAMMING
UV CYCLE?
NO
INITIAL PROGRAMMING
DEFROST CYCLE?
YES
INITIAL PROGRAMMING
PC CONNECTION?
NO
INITIAL PROGRAMMING
PC BAUDRATE
38400
INITIAL PROGRAMMING
CHILLER NETWORK ID
# 01
INITIAL PROGRAMMING
PRINTER CONNECTION?
YES
INITIAL PROGRAMMING
PRINTER BAUDRATE
1200
INITIAL PROGRAMMING
PRINT & SAVE EVENTS
EVERY 15 MIN