American Panel HURRICHILL AP20BC175-2 - Manual (Page 21)

AP20BC175-2 Manual
20
t. To change the time, press or then
press .
05 Blinks
The display will show:
NOTE: The defrost is done by running the evaporator fan for 5 minutes with the door open.
PARAM. PROGRAMMING
DEFROST CYCLE
TOTAL TIME
05 MIN
PARAM. PROGRAMMING
DEFROST CYCLE
PROGRAMMING COMPLETE
MANUAL SOFT CYCLE PARAMETERS PROGRAMMING
u. Press . The LED for "SOFT" will be steady
"ON".
v. To change the temperature, press or
then press .
28 Blinks
w. To change the temperature, press or
then press .
35 Blinks
x. To change the time, press or then
press .
01:30 Blinks
y. To change the temperature, press or
then press .
35 Blinks
z. To change the temperature, press or
then press .
42 Blinks
The display will show:
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
LOW AIR TEMPERATURE
28 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HIGH AIR TEMPERATURE
35 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
TOTAL TIME
H 01:30 MIN
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HOLDING LOW TEMP
35 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HOLDING HIGH TEMP
42 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
PROGRAMMING COMPLETE