Analog Way Eikos - Manual (Page 23)

Pin outs
• VGA
STANDARD VGA
1- Red 6- Red Return 11- ID Bit 0
2- Green 7- Green Return 12- ID Bit 1
3- Blue 8- Blue Return 13- H Sync
4- ID Bit 2 9- No Pin 14- V Sync
5- Test (Gnd) 10- Sync Return 15- ID Bit 3
• DIGITAL VISUAL INTERFACE DVI
Pin
1- TMDS Data 2- 7- DDC Data 13- Not used 19- TMDS Data 0 Shield
2- TMDS Data 2+ 8- Analog Vertical Sync 14- +5V (Power) 20- Not used
3- TMDS Data 2 Shield 9- TMDS Data 1- 15- Ground for (+5V) 21- Not used
4- Not used 10- TMDS Data 1+ 16- Hot Plug Detect. 22- TMDS Clock Shield
5- Not used 11- TMDS Data 1 Shield 17- TMDS Data 0- 23- TMDS Clock +
6- DDC Clock 12- Not used 18- TMDS Data 0+ 24- TMDS Clock-
C1- Analog Red Video (or Cr/Pr or C)
C2- Analog Green Video (or Y or Composite Video)
C3- Analog Blue Video (or Cb/Pb)
C4- Analog Horizontal Sync (or Composite Sync)
C5- Analog Common Ground Return
DDC = Display Data Channel
TMDS = Transition Minimized differential signal
• RS-232 CONNECTOR
Pin
1- NC 6- NC
2- Transmit data to PC (Tx1) 7- NC
3- Transmit data from PC (Rx1) 8- NC (or +12V. dc)
4- Receive data from display unit (Rx2) 9- Transmit data to display unit (Tx2)
5- Ground
• S-VIDEO (Y/C) CONNECTOR - 4-pin Mini Din
Pin
1- Y Ground
2- C Ground
3- Y Signal
4- C Signal
• VESA DDC
Pin
1- Red 7- Green Return 13- H Sync
2- Green 8- Blue Return 14- V Sync
3- Blue 9- DDC+5 Volt supply 15- Data Clock (SCL)
4- ID Bit 2 0 10- Sync Return
5- Test 11- ID Bit
6- Red Return 12- Bi-directional data (SDA)
21