Analog Way Eikos - Manual (Page 56)

Output selection settings
To set up the outputs, go in the Output #1 or Output #2 menu and choose first the appropriate format/reso-
lution and then the adapted rate for your screens by using the knob button and the Enter button.
Output# → Output Format → Output rate
You can also in the Output #2 menu, synchronise all the changes from the Output #1 to the Output #2 by
checking the case Synch w/Out 1 . It allows you to set up both outputs at the same time.
Output #2 → Synch w/Out 1
Try to use the native resolution of your screens/projectors in order to obtain the best image quality.
* NOTE *: The output status can provide you all information about the output in real time. This feature is
particularly needed when HDCP is used thanks to the HDCP status.
*All changes have to be validated by pressing the OK button in order to be saved*
Video Out
In Native Matrix mode, the menu “connection mode” allows you to choose recording Output #1 or Output #2.
Display Mode
Display Mode
Presentation
Presentation
Availability
Availability
Output #1
Output #1 & #2 side by side
YES
Matrix Mode only
YES
Matrix Mode only
OUT #1
OUT #1
OUT #1
Output #2
Output #1 & #2 Top and Bottom
OUT #2
OUT #2
OUT #2
Menu→ Video Out → Connection →
Output #1
Menu→ Video Out → Connection →
Output Titled Horizontally
Menu→ Video Out → Connection →
Output Titled Vertically
Menu→ Video Out → Connection →
Output #2
54