Analog Way Eikos User Manual
Page 58
To use the Mirror mode, just perform your setting and operation from the Matrix output
#
1.
Nevertheless, you can do manipulation on the output
#
2 at any time.
For a perfect use, set up the output format and rate for the output
#
2 as for the output
#
1 using the synchro-
nise button:
Output
#
2 → Synch w/Out 1
Working with Mirror Modes
The Mirror Matrix Mode is a specific Matrix Mode where the output
#
2 will be the perfect mirror copy of the
output
#
1. In that way, each settings apply to output
#
1 will be performed on the output
#
2 too.
Mode Menu → Matrix Mode Menu
Using the Matrix Mode, several configurations are available, the simple Mode and the mirror mode.
Using the Mirror Mode:
Select the chosen layer and go in the layer menu, then select the “Layer Copy Mode” menu.
There are several mirror positioning options:
To use the Mirror Mode, simply select the Matrix Mode throught the main menu, then the Mirror Mode can be
activated layer by layer thanks to the layers menu.
56
PIP
PIP + Background
1
No Copy: This mode is the standard Matrix Mode, output #1 and #2 are independent
.
2
Copy Mode (Clone mode): Output #1 and #2 will be the same. All
changes on output #1 will be affected to output #2. PIPs will have
the same position and size
.
Copy Mode (Clone mode): Output #1 and #2 will be the same. All
changes on output #1 will be affected to output #2. The PIP and
the background will have the same position and size
.
3
Copy & Horizontal position Flip mode: Output #2 will be exactly
the same as output #1 except the fact that the selected PIP will
have its Horizontal position flipped
Copy & Horizontal position Flip mode: Output #2 will be exactly
the same as output #1 except the fact that the selected PIP or
background will have its Horizontal position flipped
4
Copy & Horizontal + Data Flip all modes: Output #2 will be
exactly the same as the output #1 except the fact that the selected
PIP will have its Horizontal position and data flipped
.
Copy & Horizontal + Data Flip all modes: Output #2 will be
exactly the same as the output #1 except the fact that the selec-
ted PIP or background will have its Horizontal position and data
flipped
.
OUTPUT #1
OUTPUT #2
OUTPUT #1
OUTPUT #1
OUTPUT #2
OUTPUT #2
OUTPUT #1
OUTPUT #1
OUTPUT #2
OUTPUT #2
OUTPUT #1
OUTPUT #1
OUTPUT #2
OUTPUT #2
Mode
Layer