Analog Way Eikos - Manual (Page 45)

Capturing still Frames
To capture a frame, display the exact content you want to save on one of your outputs, at the exact resolution,
you can use the freeze button if you want. Then follow this step:
Logos/Frames menu → record Frame menu→ Frame #
Choose the frame number slot and wait until the unit to finish saving. Your frame is now saved and you can
use it through the background frame button.
The capture of frames can be done only under the following conditions:
- The unit can be in Mixer Mode or Matrix Mode,
- The capture can be done the Main output or the Preview output,
- The disappearance of frames on the Preview and Main output is normal.
A frame captures the state of the specified output at the main output resolution, and must be recalled using the same
output resolution. Resizing or other image manipulation of the captured frame is not possible.
Attempting to use a Frame at a different resolution will result in a partial Frame display or a Frame which does not fill
the step.
The captured output is outlined by a white border and includes the pixels beneath the white border.
Border:
The border has to be setting up in the Layer Menu:
Press PIP# button → go in border menu → select and set your border with colour and size
Press Take to view the result on the main screen.
No border Color border
Shadow border
(Four possible orientations)
- Size and style of PIP border are
adjustable
- The background or PIP image
can be switched
A transparency can be applied
to the shadow border
43