BEI Sensors High Resolution Inclinometers - Manual (Page 4)

Page 4 Inclinometer RS232 – Current Datasheet Version: 20130503
INCLI NO MET E R
RS2 32 – CURRENT
2 Installation
2.1 Electrical Connection
The inclinometer is connected via 8 pin round connector or a cable
2.2 Connector Assignment
Pin Description P8F-Cable CRW-Cable
1 +UB Supply voltage white white
2 RxD brown brown
3 TxD green green
4 Ground (Supply) yellow yellow
5 X-Output grey grey
6 S-Ground pink pink
7 Y-Output blue red
8 – red –
Output signal (X, Y) analog current 4 to 20 mA (+x,y° to -x,y°)
Installation Instructions
Do not connect the inclinometer under power!
Do not stand on the inclinometer!
Avoid mechanical load!
Front view of housing
Connector inclinometer