Burkert Type 8696 - Manual (Page 7)

7
Generalinformation
4. GENERAL INFORMATION
4.1. Contact address
Germany
Bürkert Fluid Control System
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
www.burkert.com
4.2. Warranty
The warranty is only valid if the positioner Type 8696 is used as intended
in accordance with the specified application conditions.
4.3. Information on the internet
The operating instructions and data sheets for Type 8696 can be found
on the Internet at:
www.burkert.com
5. SYSTEM DESCRIPTION
5.1. Structure and function
Positioner
Actuator
Valve body
Process valve
Fig. 1: Structure 1
Positioner Type 8696 is an electropneumatic position controller for
pneumatically actuated control valves with single-acting actuators.
Together with the pneumatic actuator, the positioner forms a functional
unit.
The control valve systems can be used for a wide range of control
tasks in fluid technology and, depending on the application conditions,
different process valves from the Bürkert range can be combined with
the positioner. Angle seat valves, straight seat valves or diaphragm
valves of the Type 2300, 2301 or 2103 with an actuator size of 50
mm are suitable.
english
Type 8696