Led status display – Burkert Type 8694 User Manual
Page 50
50
AS-Interfaceinstallation
11.5. LED status display
The LED status display indicates the bus status (LED green and red).
Bus LED green
Bus LED red
Figure 31:
LED status display AS-Interface
LED green
LED red
off
off
POWER OFF
off
on
No data traffic (expired Watch Dog at slave address does not equal 0)
on
off
OK
flashing
on
Slave address equals 0
off
flashing
Electronic error or external reset
flashing
flashing
Timeout bus communication after 100 ms (periphery error)
Table 24:
LED Status Display AS-Interface
Seal
body casing
Body casing
Figure 32:
Position of the seal in the body casing
→
Check that the seal is correctly positioned in the body casing.
NOTE!
Damage or malfunction due to penetration of dirt and humidity!
• To observe protection class IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674077
19)
).
19)
The assembly tool (674077) is available from your Bürkert sales office.
English
Type 8694