Burkert Type 8644 - Manual (Page 37)

37
Structureandfunctionofthemodules
7.3. electronic base module
7.3.1. general description
The electronic base module is connected to the adjacent modules via its electrical interface. In this way it receives both
the power supply and the control signals for the valves on the slots. The electronic base modules and therefore the
valve discs can be controlled as digital output modules / terminals. For detailed information see Chapter “10. Start-Up”.
Variants
The valves used for AirLINE Type 8644 have different wiring diagrams, valve dimensions and control properties.
Accordingly the electronic base modules exist in different versions.

Function module
LED display Inscription area
Ejector hooks
Valve slot
Electrical interface
Distributor module
Mechanical connection to
the pneumatic base module
Figure 16: Example of an electronic base module (Type ME02 / 2-fold)
Available variants
Variants 2-fold
monostable
2-fold
bistable
3-fold 10 mm
monostable
4-fold
monostable
2-fold
2 x monostable
ME02 X X - X X
ME03 X X X X -
english
Type 8644