Burkert Type 8076 - Manual (Page 37)

37
Adjustment and commissioning
Type 8026- 8036- 8076
8.8.5. setting the parameters of the transistor outputs
The 2nd transistor output "TR2" is only available on a version with 2 transistor outputs.
Param TR1 / TR2 PVar:
Mode: Hysteresis
Low: INPUT
Contact: Normally open
Normally closed
Window
High: INPUT
Delay: INPUT
Outputs
Pulse
Flow_L
Flow_m3
Flow_gal
Flow_Igal
Freq.
Tot1_L
Tot1_m3
Tot1_gal
Tot1_Igal
Tot2_L
Tot2_m3
Tot2_gal
Tot2_Igal
Warning
If "Mode" ≠ "Pulse"
Pulse: INPUT
If "PVar" ≠ "Warning"
If "Mode" ≠ "Pulse"
If "Mode" = "Pulse"
This is
when the
device is be-
ing parame-
tered............
.................... This is
when the
device is be-
ing parame-
tered............
....................
English