General information, Manufacturer's address and international contacts, Warranty conditions – Burkert Type 8011 User Manual
Page 8: Information on the internet, Description, Area of application, General description
8
Generalinformation
Type 8011
4.
GenerAl informATion
4.1.
manufacturer's address and
international contacts
To contact the manufacturer of the device use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices can be found on the
last pages of this manual. They are also available on the Internet at:
4.2.
Warranty conditions
The condition governing the legal warranty is the conforming use of
the 8011 in observance of the operating conditions specified in this
manual.
4.3.
information on the internet
You can find the user manuals and technical data sheets regarding
the type 8011 at:
5.
DescripTion
5.1.
Area of application
The 8011 flowmeter is intended to measure the flow rate of neutral or
slightly aggressive liquids free of solid particles.
5.2.
General description
The 8011 flowmeter comprises the SE11 electronics incorporating
the measuring paddle-wheel and an S012 fitting allowing the device
to be fitted to all types of pipes from DN6 to DN65.
Paddle-wheel
SE11
S012
The sensor detects the rotation of the paddle-wheel; it generates a
signal in which the frequency f is proportional to the rotation frequency
of the paddle-wheel.
English