Connecting both the current and pulse outputs, Commissioning, Safety instructions – Burkert Type 8081 User Manual
Page 20
20
Type 8081
english
Commissioning
7.3.5.
connecting both the current and
pulse outputs
12-36 VDC
+
-
+
-
1
2
3
4
(*)
Load
4-20 mA
input
brown
grey
blue
white
black
Supply
12-36 VDC
+
-
+
-
1
2
3
4
(*)
Load
4-20 mA
input
brown
grey
blue
white
black
Supply
PNP/sourcing mode connection
(default setting)
NPN/sinking mode connection
(on request)
(*) If a direct earthing connection is not possible, fit a 100 nF/50 V capacitor
between the negative terminal of the power supply and the earth.
8.
commissioninG
8.1.
safety instructions
Warning
danger due to non-conforming commissioning.
Non-conforming commissioning could lead to injuries and damage
the device and its surroundings.
• Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
• In particular, observe the safety recommendations and standard
operating practices.
• The device/installation must only be commissioned by suitably
trained staff.
• Protect the device against electromagnetic interference, ultravio-
let rays and, when installed outdoors, the effects of the climatic
conditions.