Burkert Type 8081 - Manual (Page 6)

6
Type 8081
english
intendeduse
2. inTended use
use of the ultrasonic flow rate transmitter that does not com-
ply with the instructions could present risks to people, nearby
installations and the environment.
• The 8081 transmitter is intended solely for the measurement of
the flow rate in water or neutral liquids.
• If possible, avoid placing this device near sources of electromag-
netic interference
• This device must be protected against ultraviolet rays and, when
installed outdoors, the effects of the climatic conditions.
• This device must be used in compliance with the characteristics
and commissioning and use conditions specified in the contractual
documents and in the user manual.
• The device can only be used together with devices and compo-
nents recommended and/or approved by Bürkert.
• Requirements for safe and proper operation are proper transport,
storage and installation as well as careful operation and mainte-
nance
• Only use the device as intended.
→
Observe any existing restraints when the device is exported.
3. bAsic sAfeTy informATion
This safety information does not take into account:
• any contingencies or occurences that may arise during assembly,
use and maintenance of the devices.
• the local safety regulations that the operator must ensure the staff
in charge of assembly observe.
danger due to high pressure.
danger due to high temperatures of the fluid.
danger due to electrical voltage.
Various dangerous situations
To avoid injury take care:
• to prevent any power supply switch on.
• to carry out the installation and maintenance work by qualified and
skilled staff with the appropriate tools.
• to guarantee a set or controlled restarting of the process, after a
power supply interruption.
• to use the device only if in perfect working order and in compliance
with the instructions provided in the user manual
• to observe the general technical rules during the planning and
use of the device.