Fluid Components International CMF Series Manual Installation of Electronics User Manual
Page 3
Advertising
In
st
allation of signal con.
Fluid Components Intl
Document 06EN003327 Rev. -
33
FlexCOR
™
Model CMF Series
Unpack the add-on modules and locate it in
the bottom of the transmitter as shown.
5.2.1 Add-on modules
Press the add-on module forward as far as
possible.
The add-on module has now been installed.
The transmitter is ready to be installed on the
terminal box.
Communication to the operator menu and
electrical inputs and outputs are automati-
cally established at power on.
Advertising