Arcam DV79 User Manual
Page 28
DV79
E-28
E
n
g
li
s
h
DV79
E-29
Status codes
The following status codes are defined:
MSB CODES:
n
Stand-by
‘0’ (0x30):
The DV79 is in stand-by state.
n
Disc loading
‘1’ (0x31):
A disc is being loaded by the DV79.
n
Tray open
‘2’ (0x32):
The disc tray is open.
n
No disc
‘3’ (0x33):
There is no disc in the DV79.
n
Stop
‘4’ (0x34):
Play-back of the disc is stopped.
n
Resume stop
‘5’ (0x35):
The DV79 is in ‘resume-stop’ state.
n
Play
‘6’ (0x36):
The DV79 is playing the disc.
n
Pause
‘7’ (0x37):
The DV79 is in ‘pause’ state.
n
Scanning
‘8’ (0x38):
Fast/slow forward/rewind in progress.
LSB CODES:
n
No menu
‘@’ (0x40):
No player menu is open (DVD menus may be open).
n
Setup
‘A’ (0x41):
The set-up menu of the DV79 is open.
n
Programme
‘B’ (0x42):
The programme menu of the DV79 is open.
n
Bookmark
‘C’ (0x43):
The bookmark menu of the DV79 is open.
n
Search
‘D’ (0x44):
The search menu of the DV79 is open.
n
Trim
‘E’ (0x45):
The trim menu of the DV79 is open.
n
PLII
‘F’ (0x46):
The Pro Logic II menu of the DV79 is open.
Example command and response sequence
As an example, the command to be set the front-panel display of the DV79 to ‘dimmed’ (defined below)
is as follows:
STR
CC
P1
P2
ETR
!
+
1
~
(0xD)
Assuming that the command was accepted by the DV79, the DV79 shall respond to this command with
the following sequence:
STR
RC
AC
P1
P2
P3
ETR
!
+
@
1
~
~
(0xD)