Clear-Com Production-Maestro-Pro - Manual (Page 41)

The Port Viewer displays:
• The conferences [ ] of which the monitored four-wire is a member.
• All the ports (panels, four-wires, idents, monitors and keygroups) the monitored four-wire is
connected to.
Figure 10: Port Viewer (conferences and port connections)
The connections list of the Port Viewer is automatically updated whenever a port is assigned to (or
removed from) a conference [ ] of which the monitored four-wire [ ] is a
member.
To connect an additional port (such as a panel, four-wire, ident, monitor or keygroup) to the monitored
four-wire, drag and drop the item into the Port Viewer.
The new port is displayed in the connections list for the Port Viewer, and a new talk and listen
crosspoint is created between the new port and the monitored four-wire [ ].
The matrices are updated by Production Maestro Pro with the new configuration.
Tip: You can copy, move, or exclusively assign panels, four-wires, idents, monitors or keygroups to a
Port Viewer. For more information about making assignments, see 4.11.4 Assignment mode >
Copy, Move and Exclusive assignments.
You can assign an alias label [ ] to a Port Viewer in exactly the same way as
conferences. For more information, see 4.11.3 Alias mode.
For more information about using audio meters [ ] with Port Viewers, see
4.20 Using audio level meters (Clear-Vu ®).
4.18.1 Remote crosspoints display
Production Maestro Pro displays remote crosspoints (crosspoints that are remote to the matrices that
Production Maestro Pro is connected to) in the Port Viewer in exactly the same way as local
crosspoints.
41 Eclipse Production Maestro Pro User Guide