Hach-Lange 2100P iso - Portable Turbidimeter Instrument - Manual (Page 5)

Page 5
4650098 cert.fm
CERTIFICATION
Hach Company certifies this instrument was tested thoroughly, inspected and found
to meet its published specifications when it was shipped from the factory.
The Model 2100P ISO Portable Turbidimeter has been tested and is certified as
indicated to the following instrumentation standards:
Product Safety:
External Power Supplies Only:
115 V ac Supply, UL Listed & CSA Certified, or
230 V ac Supply, CE Marked per 73/23/EEC, VDE Listed
EMI Immunity:
Instrument Tested with external 230 V, 50 Hz Power Supply:
Per 89/336/EEC EMC: EN 61326:1998 (Electrical Equipment for measurement,
control and laboratory use—EMC requirements) Supporting test records by Hach
Company, certified compliance by Hach Company.
Standards include:
IEC 1000-4-2:1995 (EN 61000-4-2:1995) Electro-Static Discharge Immunity
(Criteria B)
IEC 1000-4-3:1995 (EN 61000-4-3:1996) Radiated RF Electro-Magnetic Field
Immunity (Criteria B)
IEC 1000-4-4:1995 (EN 61000-4-5:1995) Electrical Fast Transients/Burst
(Criteria B)
IEC 1000-4-5:1995 (EN 61000-4-5:1995) Surge (Criteria B)
IEC 1000-4-6:1996 (EN 61000-4-6:1996) Conducted Disturbances Induced by RF
Fields (Criteria A)
IEC 1000-4-11:1994 (EN 61000-4-11:1994) Voltage Dip/Short Interruptions
(Criteria B)