INTELLINET NETWORK NSC15-WG User Manual - Manual (Page 78)

- 78 -
Camera -> Security -> Account:
The INTELLINET NETWORK SOLUTIONS network camera allows the creation of
different user accounts with different levels of access to the camera. There are
three main user levels. The Viewer account only allows viewing the live video
page of the camera. The Operator account allows viewing the live video as well
as changing the image setup settings, such as brightness, contrast, etc. Only
the Administrator account has full access to all camera settings, including the
Settings menu.
You can define up to nine different user accounts. The user name and password
must be between 4 and 16 characters in length. For each account you can also
specify the viewer mode (Administrator, Operator or Viewer).
Viewer authentication:
If this is enabled, a valid user name and password is required
in order to connect to the camera.
If you set this option to “Off,” a new option appears on the
screen (not shown in the screen shot above), that allows you
to set the viewer mode to
a) Viewer (no password required for viewing, but password is
required for any other function)
b) Operator (no password is required, except if the user
wishes to access the settings menu)
c) Administrator (no password is required for any of the
camera’s settings and functions). This setting is not
recommended because you allow any user full access to the
camera.