INTELLINET NETWORK NSC15-WG User Manual - Manual (Page 83)

- 83 -
Camera -> Advance -> FTP Client -> Alarm sending:
On this screen you activate the alarm-triggered FTP upload. In this mode, the
camera only uploads an image or a short video clip to the FTP server if an
alarm condition (motion, audio alarm, network link down or external alarm
input) has occurred.
Remote path:
Key in the folder name on the FTP server in which the
camera uploads the files. The folder is a sub-directory of
the home (root) folder of the FTP user account. Leave this
value empty and the camera will upload the files into the
home directory of the FTP user.
Image file name: Enter the image file name here. This value is the first part
of the file name.
Suffix: Select the type of information you wish to append to the
image name. Possible values are Date Time or Sequence
number.
Alarm: Motion Detection: Activate this option if the FTP upload
should be triggered by a motion detection event. The
button to the right leads to the motion detection setup
screen, which is described later in this chapter.