INTELLINET NETWORK 524711 Wireless 300N Outdoor PoE Access Point User Manual - Manual (Page 28)

22
wireless access point) here. You can input up
to 32 alphanumerical characters. NOTE:
THE ESSID IS CASE SENSITIVE.
Multiple ESSID The access point supports multiple SSID
functions; up to four SSIDs can be set. If you
want to configure additional SSIDs, click this
button. For detailed descriptions of the
function, refer to Section 2-4-1-1.
Channel
Number
Select a channel number you wish to use. If
you know a certain channel number is being
used by other wireless access points nearby,
refrain
from using the same channel number.
Associated
Clients Click the Show Active Clients button and a
new popup window will appear which contains
the information about all wireless clients
connected to this access point. You can click
the Refresh button in the popup window to
keep information up to date.
After you finish with the settings, click “Apply” and the following
message will be displayed:
When you see this message, the settings you made are
successfully saved. You can click “Continue” to go back to the
previous page and continue with other settings, or click “Apply” to
restart the wireless access point. Changes will take effect after
about 30 seconds.