INTELLINET NETWORK 524711 Wireless 300N Outdoor PoE Access Point User Manual User Manual
Page 72
66
3-3 System Reset
If you have reason to believe the access point is not working
properly, you can use this function to restart the access point,
which may solve the problem.
This function is useful when the access point isn’t within easy reach
physically. However, if the access point is not responding, you may
have to switch it off by unplugging the power cord and plugging it
back in after 10 seconds.
To reset your access point, click Reset on the left. The following
message will be displayed:
Click “Apply” and a pop-up message will ask you again to make
sure you really want to reset the access point:
Click “OK” to reset the access point, or click “Cancel” to abort.
Remember, all connections between wireless clients and this
access point will be disconnected.