INTELLINET NETWORK 524711 Wireless 300N Outdoor PoE Access Point User Manual - Manual (Page 44)

38
Here are descriptions of every setup item:
Enable WPS
Check to enable or disable the WPS function.
Wi-Fi Protected
Setup
Information All information related to WPS will be
displayed here — helpful when you’re setting
up connections by WPS.
WPS Status: Displays WPS status. If data
encryption settings of this access point have
never been set, an “unConfigured” message
will be displayed here (see Section 2-7 for
detailed information); if data encryption
settings have been set before, a “Configured”’
message will be displayed here.
Self PinCode: This is the WPS PIN code of this
access point. This code is useful when you
need to build wireless connections by WPS
with other WPS-enabled wireless devices.
SSID: Displays the SSID (ESSID) of this AP.