Advantech 5000 Series - Manual (Page 239)

Quick Start Example
Default Factory Settings
Baud rate: 9600
Bits/sec. Address: 01
(hexadecimal)
The basic hook-up for system configuration is show below:
1 3-CHANNEL RTD INPUT
1 7-CHANNEL T/C INPUT
1 8-CHANNEL ANALOG INPUT
16-CHANNEL DIGITAL INPUT
1 4-CHANNEL ANALOG OUTPUT
1 6-CHANNEL RELAY OUTPUT
1 8-CHANNEL RELAY OUTPUT
16-CHANNEL DIGITAL OUTPUT
Figure A-2 ADAM-5000 system hook-up and configuration
The following items are required to configure an ADAM-5000
system: a personal computer with RS-232 port (baud rate sent to
9600) and the ADAM utility software.
Configuration with the ADAM Utility software
The easiest way to configure the ADAM system is by using the
ADAM utility software. The easy-to-use, menu driven software
will guide you through every step of the configuration process.
(See Chapter 5, Utility Software).
A-6
ADAM-5000