Advantech 5000 Series - Manual (Page 80)

Chapter 6
$aa5
Name Reset Status
Description Checks the reset status of the addressed ADAM-5000
system to see whether it has been reset since the last
Reset Status command was issued to the ADAM-5000
system.
Syntax $aa5(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of the ADAM-5000 system whose Reset Status
is to be returned.
5 is the Reset Status command.
(cr) is the terminating character, carriage return (0Dh)
Response !aas(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error
or communication error or if the specified address does
not exist.
! delimiter character indicating a valid command was
received.
? delimiter character indicating the command was
invalid.
aa (range 00-FF) represents the 2-character hexadecimal
address of an ADAM-5000 system.
s represents the Status bit that is returned by the
ADAM-5000 system. If s=1, the system has been
reset or powered up since the last time it was issued a
Reset Status command. If s=0, the system has not been
reset.
(cr) is the terminating character, carriage return (0Dh)
ADAM-5000 6-15