CTI Products EXB Network Manager - Manual (Page 16)

Hot-Standby EXB / Network Manager Software Manual Software
CTI Products, Inc. Installation
12
68-11707-100
10. Verify that the Gesytec Easylon Network Interface is installed correctly.
-Go to Control Panel / System Properties / Device Manager.
-Click on LON Adapters / Gesytec.
-Go to the Advanced Tab.
-Click on the Adapter Name.
-Be sure it is set for LPP1. If not, change it to read LPP1.
-Close the windows.
Figure 5 Network Interface Properties Window
11. If the custom files have been factory-generated for the EXB Network
Management Software, they will be on the Customer Specific Disk(s). Copy
the following file to the working directory:
MCNChannels.dat
12. If the custom files were not included, run the EXBNet Config program to
generate the channel configuration. Use the data furnished by CTI products,
Inc.
The InstallShield program will add shortcuts for the EXBNet Config program and
the EXB Network Manager programs to the CTI Products folder on the desktop.