Appendix e. specifications, Ncb-etherlon and ncb-fiberlon, E. s – CTI Products NCB/FL with Fiber Interface User Manual
Page 35
CTI Products, Inc.
NCB-EL/FL User Guide
Appendix E. Specifications
32
A
PPENDIX
E. S
PECIFICATIONS
NCB-Etherlon and NCB-Fiberlon
DC Power Input:
10 to 32 VDC, unregulated (10BaseT)
15 to 32 VDC unregulated (AUI)
5 watts maximum without SMX transceiver
10 watts maximum with SMX power line transceiver
Size:
7.5” D x 5.6” W x 1.6” H
Operating Temperature:
0 to 60
°C
Humidity: 10-95%
non-condensing
Mounting:
Desktop with integral non-slip feet
Wallmount or 19” rack mount with optional adapters
Configuration:
Integral Router
Factory default router mode is set to Repeater. Configured or Bridge mode
can be selected using standard L
ON
W
ORKS
network management tools
capable of configuring routers.
Ethernet IP Parameters
Using supplied EtherPlug (stand-alone Windows program or LNS
application plug-in)
Transceivers Supported:
L
ON
W
ORKS
FTT-10A, TPT/XF-78, TPT/SF-1250, SMX
Ethernet
10BaseT, AUI (10BaseFL for NCB-Fiberlon)
IP Addressing Modes:
Unicast/Replicated, Multicast
IP Transport:
UDP
Maximum
L
ON
T
ALK
Packet Size: 66 bytes (factory default router configuration)
255 bytes (maximum with software re-configuration)